Replacing Your Imperial's Voltage Regulator (1967)

Imperial Home Page -> Repair -> Electrical System -> Charging System -> Voltage Regulator -> 1967 Replacement

(Click on small images to view large ones)

Battery Voltage Regulator Screw on VR

1 Eagle job - Changing your Voltage Regulator - 10 Minutes

Tools Needed - Phillips Screwdriver, Flat Head Screw Driver, 3/8 socket, 1/2 inch wrench, Napa Regulator #VR32SB

Disconnect Positive Battery cable, I just do this to prevent accidentally zapping myself, Remove Clip on Left - See 2nd Photo, remove screw on connection see photo 3, Undo top and bottom bolts (see Picture 2). Follow procedure in Reverse.

This page last updated November 26, 2001.  Send us your feedback, and come join the Imperial Mailing List - Online Car Club